McGill AirPressure can help you improve your current process if you complete the following Request for Proposal form. This form consolidates relevant system information in one location, and may also suggest other issues that will benefit your organization.
Autoclave System
Request for Proposal
Type of proposal requested:
This inquiry is:
Type of facility where equipment will install:
If firm price is required, order to be released in:
Project funding:
Approximate time-frame for autoclave installation:
City where autoclave will be installed:
State where autoclave will be installed:
Scope of work:

Autoclave workspace, diameter:
Autoclave workspace, length:
Door swing:
Door rotation:
Door open/close:
Largest part dimensions or internal rack size:
Maximum working pressure:
psi
Maximum temperature at above pressure:
°F

Approximate weight of tooling/working materials:
lbs
Approximate weight of composites:
lbs
Approximate weight of rubber:
lbs
Approximate weight of carbon steel:
lbs
Approximate weight of stainless steel:
lbs
Approximate weight of medical waste:
lbs
Approximate weight of "other" material:
lbs
"Other" material specified:
Pressurization medium:
If "other" pressurization medium is required, specify:
Pressurization rate from:
psi  to psi
Time in minutes to achieve full pressurization:
minutes
Heat source:
Heat-up rate:
Heat-up rate from:
°F  to °F
Time in minutes to achieve full heat-up:
minutes
Cool down rate from:
°F  to °150F
Time in minutes to achieve cool down:
minutes
Cooling water supply temperature:
°F
Water cooling tower required?:
Water recirculation system required?:
If water recirculation system is required, specify:
Vacuum bagging required:
Quantity of vacuum source lines:
Quantity of vacuum sense lines:
Vacuum pump required:
Maximum vacuum level required:

Control System Options

Standard Control System Options
(check all applicable selections):
Cure cycle via mechanical timer with a circular chart recorder for autoclave pressure and/or temperature.
Control via a 2-channel circular chart controller/recorder for autoclave pressure and/or temperature.
Cycle profile control via a 2-channel circular chart controller/recorder for autoclave pressure and/or temperature with final outputs via a Progammable Logic Controller (PLC).
PC-based Options
(check all applicable selections):
Capability of standard controller for computer expansion in the future (RS485 communications port).
PC-based data acquisition, cycle supervision and monitoring including PC workstation, hardware, and required software.
PC system capable of profile development, interface with controller and data aquisition, including PC workstation, control interface hardware and required software.
Part Thermocouple Options
(check all applicable selections):

Log part thermocouples to multichannel strip chart recorder.

Quantity of part T/C required:

Log part thermocouples to PC.

Quantity of part T/C required:
(PC-based aquisition system required.)

Control autoclave internal temperature via part thermocouples.

Quantity of part T/C required:
(Complete PC control system required.)


Comments:


Name:
Title:
Company:
Address:
City:
State:
Zip:
Country:
Phone:
Fax:
E-mail:

To find out more about our products and services,
contact us at: sales@mcgillairpressure.com

Or call us at: 614/829-1200, Fax: 614/445-8759.

©2002-2014 McGill AirPressure LLC
An enterprise of United McGill Corporation—Family owned and operated since 1951
Note: unless otherwise noted, all registered trademarks (®) and trademarks (™) that appear in this Web site are the property of United McGill Corporation.

Products depicted were current at the time of publication. All product designs, specifications, and features are subject to change without notice.